Mark Austin

Hello! My name is Mark Austin (forum admin), and I'd like to extend to you a warm welcome to our friendly online community! If you haven't had a chance to join our forum yet, why not register now so you can take full advantage of all this forum has to offer? And, of course, we'd love to get to know you better, so why not share some of your experiences with us? Oh, after you login, this annoying message will disappear forever! Click here to register now!

[Howard Roper]

If you use vinefire then any of these 3 programs will post your ads automatically.

Download one or all three but only use one of them at a time or you will get time out error on vinefire, Setup is a breeze and there is documentation with the files.

I've placed them in the order that I like them:

#1: FireVine_1.6.zip
#2: PostVine.rar
#3: VinePoster_v1.6.rar

Note you will need an unzip program like WINRAR to uncompress #1 #2 & #3 or WinZip for #1

Enjoy! Make Money!

P.S. A lot of people are selling these for up to $27ea I got them for free with a little Wizard ingenuity and so I can give them for free! 

[Jim Burney]

Hi Howard

I see your back in full swing with your excellent posts.

Time is a great healer, you must have done it in record time.  

I hope your new future blossoms quickly. Good luck.

Now where was I?

Oh Yes, vinefire. This one is new to me. So I shall gently check it out.

From your post it obviously has potential.

Thanks

Jim

[Howard Roper]

Hi Howard

I see your back in full swing with your excellent posts.

Time is a great healer, you must have done it in record time.  

I hope your new future blossoms quickly. Good luck.

Now where was I?

Oh Yes, vinefire. This one is new to me. So I shall gently check it out.

From your post it obviously has potential.

Thanks

Jim

Here's the link: ]http://vinefire.com/img/?i=2&rmd5=ae4cbf96e133c80a9739e7069df90d12]

[ASUService]

Note you will need an unzip program like WINRAR to uncompress #1 #2 & #3 or WinZip for #1

Thanks for the info Howard!

I also wanted to mention that ZipGenius handles almost every compression format I know of and it's free at http://www.zipgenius.com/

Thought folks might find it better to only need one package vs. several.

Hope this is helpful.

[Jim Burney]

Thanks for the info Howard!

I also wanted to mention that ZipGenius handles almost every compression format I know of and it's free at http://www.zipgenius.com/

Thought folks might find it better to only need one package vs. several.

Hope this is helpful.

Mike thanks for the zipgenius recommendation.

Jim

[Jim Burney]

Here's the link: ]http://vinefire.com/img/?i=2&rmd5=ae4cbf96e133c80a9739e7069df90d12]

Howard

Have you been paid your earnings yet?

Jim

[ASUService]

You're welcome Jim ... glad to do it!

[Howard Roper]

Here's the link: ]http://vinefire.com/img/?i=2&rmd5=ae4cbf96e133c80a9739e7069df90d12]

Howard

Have you been paid your earnings yet?

Jim

No not yet, and to be quite frank I really don't expect to be paid cause somewhere deep down inside I think it's a scam... but like I said in my previous post it's the "targeted traffic" and referrals I'm picking up from it that matters!

And with the autoposter software I have all my links and ads setup - it posts 24/7 automatically (as long as I leave my computer on), so it's => set it up - let it run - and forget it! And if I want to ad another Ad link I stop the progam, just add the url and title, change # of links to parse in the ini file and restart the program... This works for me! 

[Jim Burney]

Howard

Thanks for your explanation.

I understand where you are coming from and how you benefit.

After reading the T&C of the offer, I felt compelled to ask you about the payments, for clarification.

Once/if these people sell the site there is no obligation for the new owners to pay out (IMHO).

Regards

Jim

[action012]

Hi Howard,

Nice resource. I was wondering if you could give some tips on using the the software. I installed FireVine how long do you have the delay set for? and are you using proxy? I'm some what concerned about getting band for over posting. I know that I ran it with a 9 min delay and after about a hour I started getting the error message that title was already posted so I shut it down about an hour and trying it again.

Thanks,

Steve

[Howard Roper]

Hi Howard,

Nice resource. I was wondering if you could give some tips on using the the software. I installed FireVine how long do you have the delay set for? and are you using proxy? I'm some what concerned about getting band for over posting. I know that I ran it with a 9 min delay and after about a hour I started getting the error message that title was already posted so I shut it down about an hour and trying it again.

Thanks,

Steve

Steve,

Delay=60
no proxy
you can't be banned from over posting! Why, because you can only post every 60 seconds!
you are getting the error because you must change the title and the url every 60 seconds for every post... that is important - if you are using just one post then get very creative with title change up and use a tiny url link manager for changing the urls. Or you could also use the free link tracker I provided for everyone in this topic... Or signup http://chirppy.com/ct/index.php

I am running 71 links (posts) and have not had any problems to date with errors - that equates to ~71 minutes before link #1 is posted again!

Also, there is an update I tried it and started getting errors so I went back to previous version - no problems!

[action012]

Delay=60
no proxy
you can't be banned from over posting! Why, because you can only post every 60 seconds!
you are getting the error because you must change the title and the url every 60 seconds for every post... that is important - if you are using just one post then get very creative with title change up and use a tiny url link manager for changing the urls. Or you could also use the free link tracker I provided for everyone in this topic... Or signup http://chirppy.com/ct/index.php

I am running 71 links (posts) and have not had any problems to date with errors - that equates to ~71 minutes before link #1 is posted again!

Also, there is an update I tried it and started getting errors so I went back to previous version - no problems!

Thank you, for the information I'm sure that was the problem as I was only running two links and I did update to the 1.7 but still have the 1.6 on my computer so I may switch back.

Steve

[Howard Roper]

I have tried numerous other programs (e.g. VinePoster latest version 2) but keep going back to FireView... I also have found that if you use the update version v1.7 and kick the delay up to 65 that it runs fine. In addition VineFire is the easiest to set up of all of them and does not make autoposts for the software author like the others I tested!

I now have over 90 links running, many of them testing different title ads!! Through tracking anaylsis many of the links are generating a lot traffic to the sites I'm hosting or an affiliate of. I have generated about 10 referrals to my programs that I can determine came from this source (vinefire) since beginning the automation of it on the 24th of June.

So, as a follow-up I can say, that so far this has become good source of traffic/referrals for me. It has also allowed me to test my ads and what workes and what doesn't (super multi-split testing)... for free, and pretty quickly I might add. It has also taught me to become quite creative in my ads...

Just thought I should wrap up with my thoughts and experiences to date!  

Have a Great 4th!

[action012]

I don't know I must be doing something wrong. I've tried both version Firevine and the 2.0 version of VinePoster and after they have ran a few hours I get basically the same error message.

Line -1:


Error: The Requested action with object has failed.

any ideas?


Thanks,

Steve

[Howard Roper]

I don't know I must be doing something wrong. I've tried both version Firevine and the 2.0 version of VinePoster and after they have ran a few hours I get basically the same error message.

Line -1:


Error: The Requested action with object has failed.

any ideas?


Thanks,

Steve

Steve,

I only recommend that you run Firevine as I have encountered to many problems with the others.

Check that both the title and url in the Firevine.ini file haven't been altered in any way...
[Titles]
title1=Whatever your Ad Is!
title2=
etc.....
[Urls]
url1=http://YourSite.com
url2=
etc....
[Varibles]
sleep=65
useproxy=no
proxies=0
email=YourRegisteredEmail@vinefire.com

Are there symbols in front of the Ad? $$$ Your Ad
I took all the symbols in front of my ads off as I think they may have been causing a problem.

Also kick the delay up to no less than 65

Also was having the same problem - are you running it on Vista?
I moved the Firevine program v1.7 to my laptop which runs XP and have not had a single problem since. 

Don't run VinPoster unless you want to post the software author's posts. I have had trouble with this one from the beginning including the "New Update". 

Other than that I have not had a chance to look at the programming side - no time!  :''(

Let me know??? 

[action012]

Thanks for the reply I believe I found the problem or problem(s), not sure if it was one or both but I had blank lines in the config file and one of my posts had " marks in the title which I removed.

Been running for over 12 hours now and the only problem I get is sometimes I get an invalid url very odd because the next time it comes around theirs no problem. and it changes to a different url's  on the error it does not happen all the time just every now then.

But it doesn't seem to effect the submission so I'm not worried about it.


I'm running it on XP.

Well be careful of XP upgrade I just updated netframe  and IE that MS recommended and it broke the program.

Steve

[action012]

Just thought I would update everyone first I would have to agree with Howard that FireVine is the best of the three programs I did fine one other which is a paid program for about $40. which seem to have a-lot more bells, but I have no Idea how good it is as I'm cheep when it come to this stuff.

Just encase someone would like to know the name is V-Blaster just do a Google search.

Okay now on with the update I'm running FireVine on Windows XP, service pack3, IE 8 installed (I use FireFox myself but IE is requires for the program to work). Well I just got some of the problems worked out as stated in my other post worked grreat for about a day and then it happen MS decide that they need to updated me so they installed 4 updates.

One for netframe (wish I had wrote the number down before removing.)

two for IE KB971930, KB969897

one hot fix KB915800-v4

Now with these in place the program would act like it was posting, but nothing was getting posted I know as I was not receiving any credit for over 4 hours.

My first thought was that it would be the netframe update so I removed it first with no luck.After that I just removed the other three spun the program up and I was getting credit again within just a few minutes.

If you run into this problem you should remove the Hot Fix KB915800-v4 first before removing the other two.


Steve

 

[Howard Roper]

Thanks for your help Steve! I had forgot that I had not updated  my XP in a while. So, NOW I won't!

Microsoft always seems to take a good thing and make it worse... LOL

[KarenMcG]

Thanks for all the running commentary in here, guys.

It sounds very interesting.


Karen

[rrd257r]

Very intrigued.....  Would anyone be so kind to give another update as it's been about a month since the last post?  I'd like to see how other's are doing before I divert too much time to testing this method myself.  Thanks in advance!